Aico system solution devices, hard wired system, ancillary system devices, radioLINK system devices, sounders, switches, call points, relay modules
Some devices recommended by Aico for the inter-connecting and functioning of the fire alarm systems…
The Aico fire alarm or smoke alarm devices and systems provide a cost effective, powerful and highly flexible system of detecting the fire or smoke in a room, flat or house — both for the specifier and for the contractor. Aico’s truly comprehensive and innovative product range offers specifiers the ability to build a cost effective, powerful and highly flexible larger system where additional control and warning devices are required. You can choose from either RadioLINK wireless interconnect(devices) or traditional hardwired technology, with the unique Remote Control functionality. Now, it is possible to custom design and build the optimum system of fire detection, smoke detection, CO detection or heat detection.
There are many options for both the specifier and the installer. For the properties where a simple system is required, this can be achieved using either RadioLINK RF or hardwired technology. Where there is a need for a more comprehensive system, just choose the particular control and/or signalling devices that you need and install the system that meets your requirements. Below are a list of
- the hard-wired system devices: Aico MCP401RC(manual call point), Ei1529RC(remote control switch), Ei159(alarm locator switch), Ei128R(relay base), Ei128RBU(relay base) and Ei128COV(alarm cover).
- the ancillary devices: Aico SAB300 (Xenon beacon/strobe), SABV4 (high intensity xenon beacon/strobe), Ei167RC(remote sounder), Y03(remote sounder) and MDH230(magnetic door holder).
- RadioLINK system devices: Aico Ei168RC (alarm base), Ei407(manual call point), Ei408(switched input module), Ei411H(remote control switch), Ei420(repeater and CO alarm interface) and Ei428(remote relay module).
- that can be used in conjunction with the Aico Ei140, Aico Ei160RC, the Aico CO detectors or the multi-sensor Aico alarms — to obtain the best system that you need. More about Aico Solutions…
The Aico optical alarms
The optical sensors are more responsible to the smouldering fires producing large particle smoke, typical for… read more
The Aico ionisation alarms
The ionisation type sensors are a more sensitive class of sensors to the smoke that is almost invisible to the eye read more
The Aico heat alarms
The heat alarm are less likely to produce false alarms since they are less responsive to fire or smoke and more responsive to the rise of heat… read more
Hard Wired System — Aico Devices
Aico MCP401RC
Manual Call Point
- Mains powered with built-in 10 year+ rechargeable lithium cell back-up
- Non-breakable operating element with reset key
- For use with Ei2110 Multi-Sensor, Ei160RC and Ei140 Series alarms
Aico Ei1529RC
Remote Control Switch
- Allows the user to locate the source of an alarm when al the units are sounding, to hush any false alarms and also to test the alarm system.
- Used in mains powered system
- For use with Ei2110 Multi-Sensor, Ei160RC Series and Ei260RC Series alarms
Aico Ei159
Alarm Locator Switch
- Allows the user to locate the source of an alarm when all units are sounding
- Pressing the locate switch silences all alarms apart from the one that is the source of the alarm
- It automatically resets after 10 minutes
- For use with Ei2110 Multi-Sensor, Ei160RC, Ei140 and Ei260RC Series alarms
Aico Ei128R
Relay Base
- Contains a set of relay contacts that are switched on receipt of an alarm interconnect signal.
- Volt-free relay contacts, rated at 240V 5A.
- Pulse or Constant switching option.
- Mains powered.
- For use with Ei2110 Multi-Sensor, Ei160RC and Ei140 Series alarms.
Aico Ei128RBU Relay Base
- Same as Ei128R but with built-in 10 year+ rechargeable lithium cell
- Switcheable for constant or pulse operation.
- For use with Ei2110 Multi-Sensor, Ei160RC and Ei140 Series alarms
Aico Ei128COV
Aico Alarm Cover
This alarm cover is available separately for Aico Ei128R and Aico Ei128RBU.
Ancillary System devices — Aico alarm system
Aico SAB300 Xenon Beacon/Strobe
- For switching via an Ei428/128R/128RBU relay; mains powered.
- Flash energy of 3 Watts and flash frequency of 0.9Hz
- For internal or external use (IP65)
- Clear(C) or Red(R) lens options SABV4 High Intensity
Aico Xenon SABV4
Beacon/Strobe
- For switching via an Ei428 / 128R / 128RBU relay
- 5 Joule high intensity flash
- For internal or external use (IP65)
- Opal(O) or Red(R) lens options
- Low current consumption.
Ei167RC Remote Sounder
- Interconnects with Ei2110 Multi-Sensor, Ei160RC and Ei140 Series alarms. Also compatible with Ei168RC RadioLINK base;
- Mains powered with 10 year+ rechargeable lithium cell back-up
- Minimum sound output of 85dB(A) at 3m Y03 Remote Sounder
- For switching via an Ei428/128R/128RBU relay
- Switchable sound output frequency 500–2900Hz; Sound output level 97–100dB(A); For internal or external use (IP54)
Aico Y03
Remote Sounder
- For switching via an Ei428 / 128R / 128RBU relay. Switchable sound output frequency 500–2900Hz
- Switchable sound output 97–100dB(A)
- For internal or external use (IP54)
- Mains powered remote sounder.
- To be used in areas where a warning level is required, but a detector is not.
Aico MDH230 Magnetic Door Holder
- For switching via an Ei428 / Ei128R / Ei128RBU relay
- Supplied with metal door plate
- Magnet de-activates when relay switches and releases door plate
Aico RadioLINK system devices
Aico Ei168RC Base
- Wireless (radio-frequency) communication, RadioLINK
- For use with Ei2110 Multi-Sensor, Ei160RC and Ei140 Series alarms
- Mains powered with 10 year+ rechargeable lithium cell back-up
- Unique ‘House Coding’ feature prevents interference from neighbouring systems
Aico Ei407
Manual Call Point
- Completely wire-free
- Powered by built-in 10 year lithium cells
- For use with Ei2110 Multi-Sensor, Ei160RC and Ei140 Series alarms on Ei168RC bases
- Non-breakable operating element with reset key
Aico Ei408
Switched Input Module
- Triggers RadioLINK devices from a set of Volt-free closing contacts (e.g. sprinkler flow switch)
- Designed to be remotely sited
- Powered by built-in 10 year lithium cells
Aico Ei411H
Remote Control Switch
- Allows alarm Locate, Hush and Test functions to be performed; Completely wire-free. Powered by built-in 10 year lithium cells
- For use only with Ei2110 Multi-Sensor and Ei160RC Series alarms on Ei168RC bases
Aico Ei420 Repeater & CO Alarm Interface
- Repeats RadioLINK signals to strengthen signal paths
- Allows Ei260RC Series Carbon Monoxide (CO) alarms to be linked into a RadioLINK system
- Mains powered with 10 year+ rechargeable lithium cell back-up
Aico Ei128COV
Aico Alarm Cover
- Contains set of relay contacts that are switched on receipt of a RadioLINK signal
- Volt-free relay contacts, rated at 240V 5A
- Mains powered with 10 year+ rechargeable lithium cell back-up
- Pulse or Constant switching option Top
These are the 3 sets of recommended auxilliary devices to be used in system formed of Aico fire alarms, smoke alarms, heat alarms, optical alarms, ionisation alarms or CO alarms. You can purchase most of these devices at sparksdirect.co.uk, together with the fire alarms from Aico — domestic fire alarms.
